Other

- Use without washers for two chainrings, with washers for one DH ring - Bolts and nuts use hex keys - Includes 15 pieces total; 5 nuts, 5 bolts, 5 washers - Length: 8mm - Material: Steel - Type: Hex

Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.

- Includes 61803 (1) and 61903 (1) bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - Note: 88 front and 188v9 rear hubs are on all 2014 and newer Zipp 202, 303, 404, 808 - One kit required for: Zipp Super-9, 900 tubular and Sub-9 disc rear hubs

This pair of spacers from FSA adapts a 386 EVO crankset to a 68mm BB30 or PF30 frame using the existing BB30/PF30 bottom bracket designed for your frame.

Seatpost lever and cable set for Giant's Contact Switch Seatpost

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Problem Solvers Pog top caps are machined aluminum with a 5 or 10mm spacer integrated as one piece. This makes for a clean, finished look when mounting a stem below the top of the steerer tube. - Bolt not included - 10mm available with or without logo - 5mm available without logo only

All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Scott Part ##239530 - Attaches to frame with (1) special M5 cap head screw (sold separately) - CNC machined 6061 aluminum - Black anodized finish

Shimano & SRAM compatible single speed conversion kit; polished silver. Includes: - (7) - 4.5mm spacers - (2) - 1mm shims

The bracket is forged to create a sleek low stack design. It offers significantly lower stack than the rest of the Sonic range while retaining the extension reach and width adjustment options. It is compatible with a 31.8mm basebar, our riser kits, and 22.2mm extensions in aluminum and carbon. - Materials: Forged 6061-T6 AL - Stack Height: 23.5mm - Width Adjustment: 37mm - Basebar Clamp Diameter: 31.8mm - Extension Clamp Diameter: 22.2mm - Weight: 352g

The new range of extensions have evolved from our well proven T-Series. They have been designed to offer distinct fit options. We have also adopted a new naming system whereby the name gives the angle material of the extension. Thus 35a is a 35° bend in aluminum. Performance - The sole purpose of extensions is to provide a comfortable position for the riders hands relative to the armrests. They enhance performance by allowing the rider to relax into their optimal position. Which is why we provide different fit options so each rider can chase their best performance. Fit Data - Extension Shape: A 35 degree ski-bend extension suited to riders who prefer to adopt a wrist angle that is on the low side of the neutral range. - The 35a is a straight 35° bend. Tech Guide - All the extensions have a 22.2mm diameter in the clamping area. - They are designed for cables to be routed out the rear of the extensions so do not have cable exit holes. Who is it for? - The extensions will fit in any aerobar that is designed for 22.2mm. So can be used by any rider wishing to improve the comfort of their aerobar grips. - Length: 340mm or 400mm - Outer Diameter: 22.2mm - Construction: 6061-T6 aluminum, pre-drilled for bar-end shifter cable routing - Weight: 200g/pair

Vuka Alumina Clip Risers are designed for use with the Vuka Alumina Clip's above-bar option. The risers are designed to offer a wider range of adjustability within the Vuka Alumina aero-cockpit system.

- Axle washers for use with 19mm bottom brackets - 19.1x26x2.0mm - Interface: 19mm - Sold in a 10-pack

- Bar end plugs - Sold in pairs

- Soft foam grip donuts prevent thumb blisters from riding gloveless - Intended for use with flanged BMX grips to prevent rubbing and irritation

- Economy level forged alloy seat post clamps for BMX and cruiser bikes with 1" / 25.4mm seat posts - Clamp Size: 25.4mm - Material: Alloy

- 200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals, Charger 2 sealhead,DebonAir seals)—Lyrik B1/Pike 29+ (2018+)

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

RockShox 32mm Seal Kit for repair and maintenance of Rockshox suspension forks.

- Made of forged aluminum - Quality chrome-plated bolt and superior finish - Black

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

Wolf Tooth ShiftMounts are adapter mounts that allow you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and more. Handlebar space is prime real estate and the ShiftMount seamlessly integrates brakes and shifters for a clean look. - Designed to work with rear (right side) brakes and shifters - Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters - For handlebar clamp ShiftMounts tighten clamp bolt to 1-2 Nm max torque - 6061-T6 aluminum - ISEV-ISB is for a Shimano I-SPEC EV shifter mounting to a Shimano I-SPEC B brake

Wolf Tooth ShiftMounts are adapter mounts that allow you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and more. Handlebar space is prime real estate and the ShiftMount seamlessly integrates brakes and shifters for a clean look. - Designed to work with rear (right side) brakes and shifters - Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters - For handlebar clamp ShiftMounts tighten clamp bolt to 1-2 Nm max torque - 6061-T6 aluminum - MM-ISII is for a SRAM MatchMaker shifter mounting to a Shimano I-SPEC II brake - MM-ISII is compatible with M9020, M9000, M8000, M7000, and M6000 brake levers - MM-ISII is compatible with, but not designed for SRAM AXS because the shift lever will be further towards the end of the bar, or closer to the rider's hand than is ideal for most riders

Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.

RockShox XLoc Parts

- ShiftMounts are adapter mounts which allows you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and Magura. - Handlebar space is prime real-estate and this ShiftMount integrates seamlessly for a clean look. - 6061 T6 aluminum - Weight: 8g - Made in the USA

- 90 degree

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 41 and 42mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Durable steel construction

M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.