Bottom Brackets

The PF4130 bottom bracket is Press Fit into 41mm diameter shells that are 86.5mm wide and mate most cranks with a 30mm spindle to that standard. If you have a BB86 frame and want to install a 386EVO crank or Rotor 30mm crank, this is the kit you need. CeramicSpeed bearings are installed in cups. The Standard Bearing has ceramic CeramicSpeed balls and hardened-steel races. The Coated Bearing has the same balls running on hardened-steel races with a 3-micron-thick metallic coating making the races harder and smoother, increasing service life and reducing friction. Enjoying the benefit of a massive, strong, and light 30mm crank spindle in your BB86 frame is possible with this kit. Press in the cups, set up the wave washer, add spacers if necessary, and torque down. CeramicSpeed's bottom bracket is also stiff and light, but its greatest benefits come in the form of drag reduction. Standard Bearings with stock grease typically have frictional drag of 0.3-0.4 watts per set. That's about a 75% drag reduction compared to conventional bottom brackets. The bearings also last at least three times longer than other bearings. Performance can be tuned by replacing grease. All Round comes with this BB, but you can change it to TT and Track Grease for less drag or to LongLife for greater durability. In The Box - 2 cups with bearings installed - 2 1mm spacers - 2 0.5mm spacers - 2 dust covers - O-ring - Plastic cable protector - 10ml syringe All Round Grease - Sticker sheet

The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The BBright for SRAM DUB Road comes in two versions. The first is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: BBright - Opening diameter: 46mm - Shell width: 79mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - Spacer-tube - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet

BSA comes from Birmingham Small Arms, aka English threading. English threading on mountain bikes means a 73mm-wide, 34mm-inside-diameter shell with reverse threading on the drive side. It's the most common threaded standard employed today. This kit allows you to fit 30mm cranks, like those from Rotor or RaceFace, to fit in the tight space of this 30mm spindle. CeramicSpeed Coated Bearings are hand-built with unique CeramicSpeed Ceramic Balls installed on coated, hardened-steel races for longer life and less bearing drag compared to standard bearings. In The Box - 2 threaded cups with bearings installed - 2 1mm spacers - 2 0.5mm spacers - 2 dust covers - O-ring - 10ml syringe All Round Grease - Sticker sheet

The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The PF30 for SRAM DUB Road comes in two versions. One version uses our low-drag, long-life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second version uses our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: PF30 - Opening diameter: 46mm - Shell width: 68mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - Spacer-tube - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet

Expand your choice of cranks for use in BB86/BB92/BB91/BB71-41/BB107 frames. Replace your bottom bracket with these dual-row flanged bearings and run 30mm spindle cranks (FSA BB386EVO, Rotor 3d+, RaceFace Next SL, e.thirteen) cranks in your frame. These bearings fit directly in frames with 41mm ID smooth bore bottom bracket shells.You must use 30mm spindle cranksets with spindle lengths longer than 104mm. - Bearings: Enduro Dual-Row ABEC-3 - Dimensions: 41mm x 30mm (42mm flange OD) - Color: silver - Bottom Bracket/Frame Interface: BB86, BB92, BB91, BB71-41, BB107/104 - Bottom Bracket Shell Width (mm): 86.5mm - 107mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: BB386EVO, BB30 longer than 104mm - Crank Spindle Diameter: 30mm - Weight: 89g

The BB30 standard opened up design possibilities for frames. Adapting it for Shimano cranks takes a special machined aluminum threaded bottom bracket that threads into itself. Ours are finished with CeramicSpeed Bearings. You have two choices in terms of bearings. The first choice is our low drag, long life standard bearing with hardened-steel races and our super-round CeramicSpeed Balls. The second choice is our coated bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. This bottom bracket works with cranks that have 24mm spindles. Bottom brackets have several variables, but within that, CeramicSpeed standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction compared to standard bottom brackets. That's thanks to balls that are 100% smoother and 15% harder than the ceramic competition. The CeramicSpeed Bearings last at least three times longer than other bearings. Coated Bearings see another big bump in performance. The coated races see a 50% drag reduction and an improvement in bearing life of 60%. Performance can be tuned by changing the grease. All Round Grease comes installed, but can be changed for lower drag TT and Track Grease, or higher durability LongLife Grease, which adds a bit of drag but stays in the bearing when riding through messy conditions. In The Box: - 1 bottom bracket with bearings installed - 2 dust covers installed - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet

Get more distance out of every pedal stroke with SRAM's phenomenal BB30 PressFit Bottom Bracket Assembly. It features ceramic bearings that drastically reduce drag on the crankset, meaning more of your power turns into forward momentum. Plus, it presses directly into your frame's 46mm-wide BB30 bottom bracket shell for reduced weight and increased longevity.

BBright is the Cervelo bottom bracket standard found on most of their frames, save the P5. In order to fit Shimano and FSA cranks into this oversized shell, this bottom bracket, complete with CeramicSpeed Bearings, needs to be pressed in. The BBright bottom bracket comes with either CeramicSpeed Standard or Coated Bearings installed. Super smooth, super-round CeramicSpeed Balls contained in hardened-steel races are found on both versions. The Coated version has a metallic coating laid onto the races, making it even smoother and harder, resulting in lower drag and longer life. BBright is similar to BB30, but is wider on the non-drive side. As such, the bottom bracket for running 24mm diameter cranks from Shimano, FSA, and others, is unique. The CeramicSpeed Standard Bearings last at least three times longer than other bearings. Thanks goes to hardened-steel races and CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. These have a frictional drag of 0.3-0.4 watts per set, which represents an average 75% drag reduction compared to most BBs. The CeramicSpeed Coated Bearings reduce drag by 50% compared to CeramicSpeed Standard Bearings, and show an improvement in bearing life by 60%. In The Box - 1 bottom bracket with bearings installed - 2 dust covers - 10ml syringe of All Round Grease - Sticker sheet

The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The EVO386 for SRAM DUB Road comes in two versions. The first version uses our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second version uses our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: EVO386 - Opening diameter: 46mm - Shell width: 86.5mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - Spacer-tube - 4 x 1mm spacers - 2 x 3mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet

The Wheels Mfg PF30 Outboard bottom bracket will give you all of the same benefits as their well-loved Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in PF30 frames without the need for adapters. - Bearings: Enduro ZERØ Ceramic - Color: Red - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 156g

PF30 Threaded bottom bracket features two machined aluminum cups that thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Directly replaces all OEM PF30 bottom brackets. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro ZERØ Ceramic Hybrid - Color: Black - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB, BBRight™ Press Fit - Bottom Bracket Shell Width (mm): 61mm to 79mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 106g

BSA is another way of stating English threading. The initialization comes from Birmingham Small Arms, which made bicycles. English threading on road bikes mean a 68mm wide, 34mm inside diameter shell with reverse threading on the drive side. It's the most common threaded standard employed today. This kit works with 24mm diameter cranks, found on cranks from Shimano, FSA, Rotor, and others. Choose between two bearings for the cups. Standard Bearings have low drag thanks to hardened-steel races and our Ceramic balls. Coated Bearings have those same balls installed on coated, hardened-steel races for longer life and less bearing drag. 24mm spindles easily fit through the shell and allow for large bearings to be employed in the outside cups. Put more of your energy into forward motion by reducing frictional drag wherever you can. CeramicSpeed Standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction compared to standard bottom brackets. CeramicSpeed balls are 100% smoother and 15% harder than ceramic competition. The bearings last at least 3x longer than other bearings. In The Box: - 2 threaded cups with bearings - 2 dust covers with built-in spacers - Spacer tube - 10mm syringe of All Round Grease - Sticker sheet

BSA is another way of stating English threading. The initialization comes from Birmingham Small Arms, which made bicycles. English threading on road bikes mean a 68mm-wide, 34mm-inside-diameter shell with reverse threading on the drive side. It's the most common threaded standard employed today. This kit allows you to fit 30mm cranks, like those from Rotor, to fit in the tight space of this 34mm spindle. Choose between two bearings types for the cups. Standard Bearings have low drag thanks to hardened-steel races and our CeramicSpeed Balls. Coated Bearings have those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Note that the threaded extensions of this BB's cups that thread into the frame are thin, as they need to fit a 30mm spindle inside the cups. CeramicSpeed standard bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction compared to standard bottom brackets. That's thanks to balls that are 100% smoother and 15% harder than the ceramic competition. The bearings last at least 3x longer than other bearings. In The Box: - 2 threaded cups with bearings installed - 2 1mm spacers - 2 0.5mm spacers - 2 dust covers - O-ring - 10ml syringe All Round Grease - Sticker sheet - Spacertube

Expand your choice of cranks for use in frames with 41mm ID shells. Replace your bottom bracket with these dual-row flanged bearings and run 29mm spindle (SRAM DUB) cranks in your frame. These bearings fit directly in frames with 41mm ID bottom bracket shells. Crankset spindle length must be longer than 104mm when used in a 86.5mm wide BB shell. - Bearings: Enduro Dual-Row ABEC-3 - Color: Silver - Bottom Bracket/Frame Interface: BB86, BB92, PF90, BB104/107, PF121, PF132 - Bottom Bracket Shell Width: 86.5mm - 132mm - Bottom Bracket Shell I.D.: 41mm - Flange OD: 42mm - Crank Spindle Diameter: 29mm (DUB) - Over Bearing Width: 92mm in 86.5mm wide shell (Dimensions include supplied silicone dust shields) - Weight: 90g Complete kit for one frame includes: - (2) Enduro BB86 to 30MM Dual-Row ABEC-3 Bearing - (2) 0.5mm crank spacer - (2) 1.0mm crank spacer - (2) 5.0mm crank spacer - (2) Dust seals