Accessories

- Lightweight and convenient tubeless plug kit - Includes two tools—a tire reamer and a tire fork perfect for mountain bike tires. - Integrated alloy case includes 10 plugs

- Control Center computer mount for any 31.8mm handlebar - Dual clamps provide superior holding power, excellent for GPS units

Clean bikes run smoother and perform better. Finish Line's Premium Bike Care Value Pack is a 3-pack of their best-selling products: Multi Bike Degreaser, Dry Teflon Bike Lube, and Super Bike Wash Concentrate. These three 4-ounce bottles make it easier than ever to keep your ride in premium shape.

Finish Line's Super Bike Wash quickly cleans dirt, clay, road grime and chain gunk off your bike. Five different cleaning agents work together to create a high-speed cleaning system. Three different rust and oxidation inhibitors protect metal surfaces to prevent rusting. It's safe for all bike surfaces.

Silicone Case for Edge 540/840

Protect your Edge 1030 with this form-fitting, removable silicone case.

Protective Silicone case for Edge 1040 and 1040 Solar

Mount your Varia Rearview Radar or Varia Smart Bike Light (each sold separately) to the seat post of a second bike with this quarter-turn mount. Includes mount and 2 fitting shims.

Mount your Varia Rearview Radar or Varia Smart Bike Light (each sold separately) to an aero or round seat post with this quarter-turn mount. Includes mount, 2 fitting shims and 4 O-rings.

These threaded 16-gram cartridges can be used with all Genuine Innovations inflators that have a 3/8-inch-24 thread.

Features - Non E-Bike rear-mount kickstand - Adjustable leg assures the perfect fit for all frame sizes (Non E-Bike) Fits: - Seek - 2013-2016 - Roam - 2013-2018+ - Rove - 2013-2018+ - Enchant - 2017+ - Escape Disc - 2017+ - BeLiv - 2018+ - BeLiv City - 2018+ - ATX - 2018+ - ARX - 2018+ - FastRoad 2017 - AnyRoad Adv - 2018+ - Talon- 2018+ - Alight- 2018+ - Tempt- 2018+ - Thrive- 2018+ - Sedona DX- 2018+ (Does NOT fit Sedona or Sedona W)

Keeping the light stable and centered on the handlebar, the stem mount allows for a clean, uncluttered handlebar.

Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000. - Camera Adapter mount with GoPro style interface - Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560) - Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer. - Centers camera in out of site position - Improves video clarity by removing plastic mount shake - Colors: Anodized Black - Weight: 14grams *Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.

This NiteRider Adapter is sold separately from K-EDGE “Combo Mount." - Precision Machined 6061-T6 Aluminum - Anodized Gunmetal - Converts a NiteRider Rail Interface to adapt K-Edge GoPro Mounting Interface - Enables compatibility with K-Edge GoBig Mounts and Combo Mounts - 2x M4 Mounting bolts with Nylok included - Compatible with Lumina Series, Mako Series - Weight: 11.5 grams

Constructed from a high quality proprietary polymer blend that is super durable. - Securely locks and perfectly positions your computer - Fits 31.8, 25.4 & 22.2mm handlebars - Simple one-bolt design makes installation a breeze - Compatible with Garmin Edge 20, 25, 130, 510, 520, 530, 810, 820, 830 & various other cycling computers - Not compatible with Edge 1000 series

Constructed from a high quality proprietary polymer blend that is super durable. - Securely locks and perfectly positions your computer - Fits 31.8, 25.4 & 22.2mm handlebars - Simple one-bolt design makes installation a breeze - Compatible with Wahoo Elemnt, Elemnt Mini, Elemnt Bolt and Elemnt Roam - Also compatible with Pioneer computers

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Replacement rubber hose and ABS Flip Thread Chuck for all high-pressure floor pumps and Micro Floor Drive (HV/HVG & HP/HPG) hand pumps. Includes all necessary aluminum connectors.

Lezyne's Chain Drive chain tool is constructed from chromoly for strength and reliability. Its ergonomic shape gives you a comfortable surface to grip while trying to knock out those stubborn 9/10-speed chain pins. Plus, it boasts four integrated spoke wrenches including Road and MTB Mavic Splined, 3.22, and 3.45 for extra versatility.

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 11 lumens. IPX7 water resistant rating. Composite matrix fender mounting system. E-bike compatible (6v input, 0.6w / 12v input 1.2w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm long power cable included. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 12 lumens. IPX7 water resistant rating. Composite matrix construction. E-bike compatible (6v input, 0.4w / 12v input 0.8w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm-long power cable included. 50 and 80mm mount spacing. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

The Lezyne EXBBT-CLT Two-Way Tool integrates an external bottom bracket cup and cassette lockring tool into one dual purpose unit. It works perfectly with Lezyne's 32mm CNC Rod (sold separately) or an adjustable wrench. The tool is made of durable, forged, and heat treated steel that is CNC machined for extremely accurate engagement. It is compatible with most external bottom brackets and cassette lockrings.

Lezyne's EXBBT-SOC is a shop quality, external bottom bracket tool constructed of durable, forged, and heat treated steel that's CNC machined for extremely accurate engagement. It is designed for use with Lezyne's 32mm CNC Rod (sold separately), an adjustable wrench, or a 3/8-inch socket driver. It is compatible with most external style bottom bracket cups.

Durable, fiber-reinforced Composite Matrix construction. Optimized side-load shape for easy bottle access in compact frames. Engineered to hold bottles securely. Oval mounting holes allow fine tuning of position on frame. - Weight: 48g

Durable, fiber reinforced Composite Matrix construction. Optimized side-load shape for easy bottle access in compact frames. Engineered to hold bottles securely. Oval mounting holes allow fine tuning of position on frame. - Weight: 48g

Lezyne's Flow Cage SL is made from a fiber reinforced Composite Matrix material for low weight, strength, and reliability. And, it loads from the side for added convenience — especially on compact frames or full suspension bikes! The pair comes with one left- and one right-side loading cage.

- Side loading design makes it easy to insert and extract bottles from the side - Low profile design improves compatibility on small/compact frames - Slotted holes for adjustable mounting - Made of composite matrix material

Durable, fiber reinforced Composite Matrix construction. Optimized side-load shape for easy bottle access in compact frames (right side configuration only). Integrated storage container below the cage with CO2 cartridge holders on both sides of the cage. Engineered to hold bottles securely. Oval mounting holes allow fine tuning of position on frame. - Weight: 94g

CNC machined aluminum dispenser with brass internals. Trigger Valve Operation for easy and controlled inflation. Twin Chuck head threads on to Presta and Schrader valves. Neoprene sleeve insulates hand from cold during discharge. Compatible with threaded CO2 cartridges. Includes one 16g cartridge. - Weight: 26g - Aluminum, a strong, lightweight, and durable material, is used to make various precision CO2 inflator components - CNC machined aluminum parts for precise and durable construction - Press on/off valve operation functions like a trigger, providing easy and precise inflation - Lezyne's ABS Flex Hose threads directly onto the valve for a secure, airtight connection. Compatible with Presta, and Schrader valves